Auto Far Infrared Sensor Stainless Steel Air Shower Room For
External Size: 2000x2000x2180mm
Internal size : 1500x1930x1910mm
Four persons with three side blowing
SS air nozzles
High velocity shower jets
Emergency stop buttons
As the filtration equipment through the action of high strength air
flow, the double person air shower room is often used in
conjunction with clean room.It can remove the impurity such as dust
on the working staff before they go into the clean room. Each side
of our product has six nozzles with a wide distribution range. With
the mouth diameter of 30mm, the nozzle can spray out the air
and the air shower area can be up to 1500×1900×1910mm. The air
shower time can be adjusted in the range of 0 to 99s. Thus, the air
shower effect can be assured to be the best level, which guarantees
the cleanliness of the clean room completely.
keling is an experienced stainless steel air shower room
manufacturer in China.We also supply double person air shower room,
stainless steel clean room pass box, double door clean cabinet, air
curtain, and much more.
Main body: 1.2mm Carbon Steel with anti-sepsis powder coating, milk
a: Inner Wall: 1.0mm Stainless Steel 304
b: Door: Carbon Steel with anti-sepsis powder coating hair line
Two window (up & down, 5mm tempered glass)
c: Door Closer: Brand GMT
d: Blower: Air Shower Room use blower, power 0.75kw
e: HEPA Filter: mini-pleats HEPA filter , filter efficiency
f: Nozzle: stainless steel 201, diameter of the wind out 25mm
g: Interlock: Brand K-LING
h: Auto Air Shower Control: Mircoprocessor, or PLC, LCD, one set
i: Air Outlet: SS 304 with punching
j: Base Floor: 1.0mm SS 304 with enhancing process
k: Lighting: Fluorescence light 2x20W
External size(mm) (WXDXH)
Work zone (mm)(WXDXH)
Persons per cycle
Air shower Duration
Factory set at 12 second (adjustable)
Steel with white color epoxy power-coated or Stainless steel
Air flow of fan(m3/h)
Fan run (r/min)
Nozzle in stain less steel
LED Fluorescent Lamp
75% @ 5um
- Shower operation controlled by solid sate LCD timer, with
tamper-proof closure to ensure selected setting is maintained.
- Emergency "off" button with audible alarm installed inside
shower. Built-in relays from motors, locks and timers.
Sequential operation initiated by sensor & door magnetic
Electrical & Power Requirements:
- All electrical components UL Approved. 230V or 460V, 3 Ph.
- Junction box on top for customer power supply.
- Control circuitry 12V DC & 24V AC
- High efficiency motors to reduce electrical load.
- Motors thermally protected & self-lubricating.
- Motors/Blowers are selected to maintain constant required airflow
rate up to twice the initial static pressure.
Filter/Blower housing has simple plug-in connector.
Lighting -Recessed 2 pin fluorescent lighting. 60 ft. candles.
All of equipment is individually factory tested for safety and
performance in accordance with international Standards. Each unit
is shipped with a documentation outlining the tests undertaken and
the units individual results for each unit.
Factory test include:
--functional test and visual inspection
--electrical safety tests
--air velocity testing
--purification rank test (if need)
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
Our equipment is warranty for 1 year excluding consumable parts and
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
T/T in advance, 30% before place the order, 70% when you see copy
Or 30% T/T in advance before place the order, 70% LC at sight.