Full Welded 304 Ss Clean Room Pass Through Box With Mechanical
Quick Detai For Cleanroom pass box :
External Size: 700x600x690mm
internal size :600x600x600mm
Interlocker : Mechanical or electronic
Material: inside is SUS304/201. Outside is steel with power coated
Material thickness : 1mm/1.2mm
UV Light : 1 pcs
The stainless steel clean room pass box adopts the SUS304 stainless
steel as the material for interior and exterior product body and
the two doors. The thickness of the stainless steel is 1.0/1.2 mm.
Meanwhile, the product is equipped with the ultraviolet lamp with
the power of 10W and the wavelength of 254nm. It can get the ideal
sterilization effect. In addition, the embedded type installation
of ultraviolet lamp can reduce the contact possibility of delivered
articles and ultraviolet lamp tube to ensure safe use.
operating features :
1: C leanroom pass box is manufactured for the most demanding controlled environment
2: All components are designed for maximum chemical resistance and
enhanced durability for
a long service life.
3: It is constructed of stainless steel inside, making the work
zone easy to clean and endurable.
4: Fool proof Mechanical and electric interlock are reliable,
maintenance-free, maintains clean
room integrity by preventing both door from being opened and the
5: Contamination-free transfer of materials in and out of the
6: Cleanroom pass box should be eliminates unnecessary personnel
7: Full range of sizes meets any application
8: Stainless steel doors, latches and hinges extend service life—a
must in a production environment!
10: Material options accommodate many application requirements,
from chemical resistance to
static control to fire safety.
11: Fully-welded type 304 finish stainless steel construction
12: Smooth-ground crevice-free continuous seam welds throughout the
interior and exterior
13: Service access via removable flush mount side panels secured by
hex head stainless steel hardware
External size (mm)
Internal size (mm)
1: Entirety Sus201/304.
2: External is steel with power coated, Internal is SUS304.
3: External is steel with power coated. Internal is SUS301.
Glass window size
Mechanical or electronic for your choose
Cleanroom pass box allow products to enter a cleanroom without
human traffic that
increases particle loads and slows operations. Clean Air Products
offers a broad range of
pass-thru cabinets, and our staff of experts will ensure you get
the best product for your needs.
Consider the following options in making your selection:
Wall or Floor Mount?
Wall-mount models can be positioned at a comfortable standing
floor-mount models include a low-profile ramp to allow carts to be
wheeled into the chamber.
Special mounting hardware is included for each model. Order support
brackets for larger
wall-mount models (see illustration above). Your wall cutout should
be .5" (13 mm) larger
than the overall height and width of your chamber.
Pass-Through Chamber Material?
Select among seven standard materials. Others (including
polycarbonate and dissipative polycarbonate) are also available.
These easy-open doors eliminate clearance requirements.
Reinforced Doors—Plastic cabinets come with stainless steel
reinforced door frames on a standard basis.
Other cleanroom pass box Through Options:
it is include a filter/blower module, shelves (with electropolished
stainless steel racks), illuminator, and grounding terminals.
All of equipment is individually factory tested for safety and
performance in accordance with international Standards. Each unit
is shipped with a documentation outlining the tests undertaken and
the units individual results for each unit.
Factory test include:
-- functional test and visual inspection
-- electrical safety tests
-- air velocity testing
-- purification rank test (if need)
Our equipment is warranty for 1 year excluding consumable parts and
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
T/T in advance, 30% before place the order, 70% when you see copy
Or 30% T/T in advance before place the order, 70% LC at sight.